Видео

Anything planned for the FX DRS coming up?

I have both FX AND DAYSTATE = IMPACT M3 and ALPHA WOLF BLUE, keep this on mind one rifle is mechanical the other one is mechanical/electronic which means it has a computer , solenoids, however both need someone capable of thinking , mechanically inclined to work on those guns ,you can add on a lot of accessories so now that we establish the fundamentals let’s not be so dramatic if you can’t get part or extra warranty for you gun , stack up on extra parts most common to fail ( o-rings, trigger, etc) be safe.

Very helpful and informative video, is the HUMA regulator adjustable in terms of power ?

Привет! Подскажи, пожалуйста. Если для 0.177 диаметры 2,5-3,5, то перепуски (трансфер порты) для 0.22 и 0.25 калибров в каких диапазонах размеров находятся?

Hi - will you sell the reg tool? Thanks

I will be getting my new BRK Ghost 22ca. very soon and your video is full of very good information for me....Thank you. I noticed you changed your cheek piece to left hand, was it difficult to make that change, as I am also a left hand shooter.

Amigos, con cual poston agrupa mejor la edgun leshiy 2

YOU ARE DOING GOOD JOB BUT I DO NOT EXCEPTED DUE TO WORK ON THE FLOOR. YOU SHOULD OR YOU MUST WORK IT ONTHE TABLE.

👍👍

hi where can we find the adapter for the AR grip

What size X ring?

Will the 28mm fit the bsa r12? I see in your r12 video you fitted an aftermarket one with an X-Ring. What size X-ring?

can nickel plating be a good idea?

Do you prefer the ghost ovet the impact?

Can you fit the FX bottle valve in the AGT bottle if you want to keep the original bottle but with a self sealing valve.

as usual you make an amazing video a brotherly hug from Italy Fabio

Hi do you work on the steyr lg100 many thanks? I'm in the UK if you do send me a message and I'll be glad to see what you can do as I'm massively impressed with your engineering skills 👌 many thanks

So tempted with getting a V3 but hearing all variants are now unchocked for slug use?

honest review . are you going to do anything with the kalibr snipe in the future

My new Wildcat BT came from factory producing 10.5 ft/lbs on setting 7 of the power wheel with 15.89gr pellets and I couldn't be arsed with the hassle of sending it back so this video is absolute GOLD for me. Thanks from a new subscriber!

Is there any reason why you didn't fit an external PTFE sleeve over the hammer spring as you did with the Urigan ?.

Where can I find one

£82 then you have to buy all the bits, I'll stick with my old combro lol

Hi love the video no it’s quite old but just got a dreamline tact in 22 and just wondering do you have to remove the trigger and trigger cier to replace original factory hammer to upgraded fx hammer. Than you andThanks for your time. Hope you can help.

Looks quite nice BUT it must have a battery onboard and plastic doesn't turn me on either. 3D printing seems ok but a better material should be used.

15:54 The hummer the black part after installing back it has some play ? When not cocked, is this normal? Btw thank you again

15 :55 "in the hammer " the black part after installing back it has some play ? When not cocked ,

Nice ,, There is one strange screw located vertically under the location where magazine installed , and i don't know what is the goal of that screw ?

The taking off of the silencer which can cause the need for rezero is a no from me, I also like to take my chrony (fx) in the field with me sometimes, i would definitely lose some of those bits plus wires and power bank which would be an added cost for me adds to that, would have to be very cheap to consider it as a first purchase into the chrony world so to speak especially over the crombo at £50,00 which has no need for wires battery, apps pocket full of bits. Wish the product all the best but i cant see it catching on in all fairness especially when your prone to displacing bits like me and also the charging of power banks adds to the list of prep i dont want

En cuartos ya

Hello Jake.Thank you for an excellent work you are sharing with us. Would it be possible to order the muzzle brake for FX dynamic? Happy to come down or meet you at Daniel's store. Many thanks Rob

i got one from from the shooting show and had nothing but problems with sensor faulting no matter how many times i clean it

Hey! I dry fired my rifle to make sure no air was in the system and I believe this bent my valve. I now have a massive leak through the barrel and it wont hold air. Do you have the v2 valve installed (which is thicker) or any other modification that allows you to dry fire it?

The beauty of 3D printing is how versatile it is to changing design features....effectively a very quick way of rapid prototyping & getting things made quickly to prove concepts, etc

Looks cheap and tacky and just to complicated compared to others on the market

👍👍👍

Definately needs a couple of years refinement before it gets my vote. All the parts are priced separately, would be better as a comprehensive kit. Reminds me of the old Combro Chrony which was cheaper and neater, Sorry but not impressed.

Too much fuss and messing about with wires phones battery packs needing a phone to connect to see results etc etc.... I'll stick to me £20 chinese ebay one, no messing about and as accurate as anything else.

Bit of a technophob , but I like it.

Light and portable option, would be useful on pistols as well if it had an onboard battery. Certainly worth looking into.

Wouldn't be confident using it on a springer & definitely be wary on a break barrel. Would be a lot better with aluminum barrel mount adaptors with a screw going through a nut set into the plastic body to a threaded hole in the aluminium adaptors. Making the adaptors out of Aluminium would not be as expensive as making the full body out of aluminium.

Looks super cheap, but I would take functionality and accuracy over that 🙂

Seems a useful chrono good honest review as always. I use the small FX chrono as I can shoot over the top of it down range to calculate BC of pellets. That said using this on the muzzle with FX downrange would halve the shots needed.

I’m with you on 3D printed stuff.

to be fair not to bad at all for the money. and considering it’s new on the block i suspect there will be updates in the future. pretty handy for a range crono for sure saves a lot of faf

👍🏻

Just ordered one and its on its way, and a new one is out just my luck lol,

Hi Jeff & Jake, are you still making the valve removal tool for Bagnall’s, they are out of stock at the moment. My Ghost is now back with my RFD for the third time in six months with valve issues. As it involves a round trip 70 miles every time it’s had a problem I’m getting a little fed up with it. After watching your video on how to access the valve I’d like to have the tool to be able to do it myself. Cheers

So we’ve taken a thing and made it uglier, more complicated more fiddly and cheaper looking like something out of a Christmas cracker🤷‍♂️🙄🤦‍♂️

I've been thinking about 1,so thanks for the review..it will be interesting to see how they hold up over time